设为首页加入收藏企业邮局   
   
首 页 关于艾斯佩克 新闻中心 产品中心 技术服务 人才加盟 联系我们


产品列表
 环境试验设备事业部
 钣金加工事业部
 加热元件事业部
 销售代理事业部


联系我们
研制基地:福州市仓山区阳岐路61 号福湾工业园
营销中心:福州市仓山区连江南路15号二 层B50-B51号
电 话:0591-83830172
0591-83830185
邮 箱:spec@china-spec.com

三箱冷热冲击试验机

  产品简介
型号Model
SPEC-BT36
SPEC-BT80
SPEC-BT150
SPEC-BT250
SPEC-BT420
内部尺寸Intemal Dimensions WxHxD(mm)
400x300x300
500x400x400
600x500x500
700x600x500
800x700x700
外部尺寸Extemal Dimensions WxHxD(mm)
1400x1750x1450
1480x1800x1550
1600x1900x1650
1700x2000x1750
1800x2100x1850
冲击温度范围Shock Temperature Range
(150℃~L:-45℃;M:-55℃;H:-65℃);(高温区 High temperature zone:+60℃~+150℃;低温区Low temperature zone:-10℃~ -65℃;)
升温时间(蓄热区)Heating Time (regenerative)
RT~200℃约需35min RT~200℃ about 35min
降温时间(蓄冷区)Cooling Time (storage)
RT~-70℃约需85min RT~-70℃ about 85min
温度回复时间/转换时间Perature Response Time / Time Change
≤3~5min
温度控制精度/分部精度
Precision Temperature Control / Distribution Accuracy
±0.5℃/±2.0℃
内外部材质Inner and Outer Materials
全机为SUS 304#不锈钢雾面处理,內箱为不锈钢The whole set is SUS 304# stainless steel treated with mist.Inner box is stainless steel
保温材質Insulation Materials
耐高温高密度氯基甲酸乙醋泡沫绝缘体材料
Resistant to high-density aluminum silicate fiber cotton or PU foam insulator materials
系统System
P.I.D+S.S.R+微电脑平衡调温控制系统P.I.S+S.S.R+Micro-computer balanced temperature control system
冷却系统Cooling System
半密闭式双段压缩机(水冷式)/全密闭式双段压缩机(风冷式)
Semi-hermetic double-stage compressor(water-cooled type)/Hermetic double-stage compressor(air-cooled type)
安全保护装置Protection Devices
无熔丝开关、压缩机高低压保护开关、冷媒高压保护开关、故障警告系统、电子报警
Non-fuse breaker,high and low pressure protective switch of the compressor,refrigerator high-pressure protective switch,failure warning system,electronic alarm
配件Accessories
观视窗(特殊选择型)、上下可调隔层两片、通电测试孔、脚轮、水平支架
Viewing window(special order),shelves(freely adjustable,2 pes),power-on test cable port,castor,horizontal support
电源Power
AC380V 50HZ/60HZ 3
控制器control panel
韩国“TEMI”South Korea”TEML”或者日本“OYO“牌Japan’s Brand 任选South Korea”TEML”or Japan,s”OYO” Brand Optional
 
压缩机Compressor
德国“比泽尔””Bezer”Brand
重量(大约)Weight(approximate)
500kg
600kg
700kg
750kg
900kg

Programmable Thermal Shock Chamber

Programmable Thermal shock chamber is used to test most commercial products to see how they withstand drastic temperature changes. A thermal shock chamber will subject a product to the most extreme temperature conditions, instantly.

The purpose of testing a product under these circumstances by the programmable thermal shock tester is to observe changes in the products characteristics and check for failure occurrence of different materials and thermal expansion coefficients.
Model SPEC-BT80L
Interal Dimension (W× H× D) 500× 400× 400mm
Outside dimension 1650× 1920× 1420mm
Structure Three chambers design (the hot chamber, the cold chamber and the testing chamber)
Damper device Forced air drived damper
Interior material SUS#304 Stainless steel plate
Exterior material SUS#304 Stainless steel plate
Basket material SUS#304 Stainless steel plate
Refrigeration Cascade refrigeration system
Cooling method Air or Water
Ambient temperature 0 centigrade degrees to 30centigrade degrees
Preheating temperature +60.00centigrade degrees to +200.00centigrade degrees
Precooling temperature -10.00centigrade degrees to -70.00centigrade degrees
H. T. Shocking +60.00centigrade degrees to +150.00centigrade degrees
L. T. Shocking -10.00centigrade degrees to -65.00centigrade degrees
Temperature uniformity ± 2.00centigrade degrees
Simulated load ic 5.0kg
HT IN-Zone -65.00 centigrade degrees to +150.00centigrade degrees/5min
LT IN-Zone +150.00centigrade degrees to -65.00centigrade degrees
Preheating time 30MIN
Precooling time 60MIN
Senor T× 4
Controller UMC1300
Setting range Temperature: -100.00centigrade degrees to +200.00centigrade degrees
TIME: OHIM to 999H/CYCLE: 0 to 9999
Resolution Temperature: 0.1centigrade degrees
Output mode PID+SSR (control method)
Power(K. W) AC380V 50HZ 20KW



福州艾斯佩克检测设备有限公司 版权所有 研制基地:福州市仓山区阳岐路61号福湾工业园 技术支持:刷新网络
公司网址:http://www.china-spec.com 电话:0591-83830172